Zhejiang Huier Coating Environmental Protection Equipment Co., Ltd
Over 20 years of experience in manufacturing coating equipment！ There is no best, only better！
Add to Cart
Casting electrophoretic coating production line is transported in the form of suspension chain. The main workpiece material is cast iron. The complete set of equipment includes pre-treatment + spraying process. The process flow is upper part → pre-degreasing → water washing → pure water washing → Silane → pure water washing → automatic water blowing → electrophoresis →UFO→UF1→ pure water washing → fresh pure water washing → automatic water blowing → drip → electrophoresis curing → cooling → spraying → curing → natural cooling → lower part. In the whole production process, the process is perfect, advanced technology equipment; Operating conditions are safe and good, and the workshop environment is clean and tidy.
1. Composition of pre-processing equipment
Pre-treatment includes shed body, liquid storage tank body, spray system, tank circulation stirring system, tank heating and temperature control system, exhaust system, water blowing device and supporting waste gas treatment system. The waste gas recovery system meets the national standard and is discharged after the cyclone tower equipment.
2. Composition of powder spraying equipment
The dusting room includes a dusting room body, a spraying system, a powder two-stage recovery system, a lighting system, etc. The process of the recovery system is that the powder that is not powdered when spraying the workpiece enters the recovery system, and through the rotation separation of the large cyclone, the relatively large powder settles into the lower recovery powder barrel. After the recovery powder pump, it enters the vibration sieve, and the powder after screening enters the powder barrel for secondary use. The remaining powder will enter the secondary recovery through the tuyere at the top of the large cyclone. Through the filter element filtration, separation, clean air discharged to the outdoor or operating workshop, powder through the pulse back blowing, into the lower secondary recovery powder barrel, to achieve the recovery effect.
3, the main structure of the equipment
The overall design of the equipment adopts a reasonable and effective design, which can withstand the additional force caused by the unbalanced wind pressure of the equipment and the overall load bearing, so as to achieve the optimization of the structure.
1.High cost performance Based on the customer's product positioning and development strategy, based on economic benefits, to achieve the best cost performance.
2. Advanced equipment design concept of excellence, high degree of automation of industrial equipment, show modern advanced enterprise style.
3. High adaptability to meet the current production requirements, and reserve space for development, considering the later production increase and quality improvement needs.
4. Quality standards strictly follow the IS0900 quality management system, and every small link of the entire equipment installation is strictly checked.
